Liquid error (snippets/cart-popup line 17): include usage is not allowed in this context Liquid error (snippets/cart-popup line 18): include usage is not allowed in this context Liquid error (snippets/cart-popup line 19): include usage is not allowed in this context

Your shopping cart

ACTIVE
Drinking water

ACTIVE +
Drinking water

NANO
Germ barrier

BALANCE
Shower filter

SHUNGIT
Shower filter

Alb Active Plus+ water filter cartridge made of degradable bioplastic against germs and harmful substances

Active Plus+

Filter cartridge for treating drinking water - with added safety

Refreshing drinking pleasure - The Active Plus+ cartridge has similar performance parameters to the standard Active cartridge, but is also able to filter a large number of bacteria (up to 0.7 µm). Another plus point is the slight reduction of limescale (approx. 4-6 °dH).

Other benefits of the cartridge include filtration/reduction of: Odor, taste, turbidity, chlorine, pesticides, microplastics and much more.

To the productAll cartridges

Active Plus+
Range of services

Removes bad taste and odors

BIOTON binds unpleasant odors (such as chlorine) and impairs taste.

Reduction of heavy metals

The adsorbing effect of BIOTON binds heavy metals such as lead and copper in drinking water.

Filtration of microplastics and the smallest particles

The ultra-fine structure of the filter medium reliably retains microscopically small particles and plastic particles down to 0.7 µm.

Reduction of pesticides and pharmaceutical residues

Organic compounds such as pesticide residues, herbicides, insecticides, drug residues, hormones and hormone-like substances can be reduced.

Against bacteria and germs

Germ protection without chemicals. Mechanical germ barrier up to a bacterial size of 0.7 µm.

Limescale reduction / water softening

Water softening through ion exchange and structural change of lime compounds (less adherent surface)

Cartridge change

Change interval 4 months - depending on the quality of the input water.

Can also be used with hot water

Insensitive even at higher water temperatures (up to approx. 45° C)

Technical data - Active Plus

Dimensions: 93 mm x 48 mm
Weight: 95 g
Material: BIOTON
Filter technology: Mechanical, adsorptive and catalytic filtration. Ion exchange process
Filter type: Pollutant filter
Replacement interval: 4 months
Filter capacity 1: 3000-5000 l
Flow rate 2: 6 l/min 3
Special features: Insensitive even at higher water temperatures (up to approx. 45° C); must always be kept moist. 

1 Average values - The capacity of the cartridge depends on the quality of the input water.
2 Average values at 3 bar water pressure.
3 Filter capacity depends on the flow rate.

Flow rate.webp__PID:1a4c6272-d9ef-4982-bbe1-d24d58a804ac
Active-Plus-Tasse-verziert-Topshot_1_670926624.webp__PID:c4faa3c9-0361-42a2-9978-ec37c9a99570

Filter medium BIOTON

The filter medium consists of a special MGS polymer (macroscopic microstructure) called "BIOTON". The water presses against the filter medium from the outside and flows through the fine structures into the inside of the cartridge. On contact with the filter medium, the water is filtered. The innovative Active Plus+ cartridge combines several water treatment methods in just one cycle:

  • Mechanical filtration
  • Adsorptive filtration
  • Ion exchange
Sketch of ActivePlus water filter cartridge. Water flows through the wall

Method 1

Mechanical filtration of impurities and microorganisms > 0.7 µm

Fine channels in the filter material form a first stage in the filtration of coarse impurities. If particles do not stick to the outer wall of the filter due to their size, they are stopped by the increasingly smaller channels. Particles and bacteria down to a size of 0.7 µm can be retained.

Sediment filter stage Active Plus drinking water filter

Method 2

Removal of odor, turbidity and organic compounds by adsorption

The strong surface forces (adhesion) of the filter material remove unwanted turbidity, odors and organic compounds from the water.

The term "organic" includes hundreds of pollutant compounds. In addition, the BIOTON filter medium effectively filters out other pollutants in a similar way to activated carbon:

  • Drug residues
  • Hormones
  • Pesticides/plant protection products
  • Per- and polyfluorinated alkyl substances(PFAS)
  • Chlorine
Drinking water filtration using adhesion against hundreds of organic pollutants

Method 3

Limescale reduction through ion exchange (softening effect)

In water treatment, the chemical process of "ion exchange" is used to achieve softening(limescale reduction) of the water. Unwanted salts are removed from the water with the help of cation and anion exchangers. For example, one calcium molecule is replaced by two sodium molecules.

At the moment the water leaves the fine channels (0.7 µm), there is an immediate drop in pressure. Part of the lime is converted into aragonite in the form of Ca2+. Aragonite has a different structure than lime (Ca2+), which means that it adheres less or not at all to surfaces. This reduces annoying limescale stains.

Conversion with cations and anion exchangers. Salts are removed from the water. Conversion to aragonite.

Method 4

Electrical adsorption

Viruses are up to 15 times smaller than the finest channels of the filter cartridge. Size comparison:

Virus: (0.03µm)
Active Plus+: 0.5µm

Nevertheless, the Active Plus+ cartridge reliably filters viruses using electronic adsorption technology. The pores of the filter have an intensive surface charge opposite to the polarity of the viruses. Due to the fineness of the pores, the electrical fields of the individual pores overlap and thus form an area-wide voltage which destroys the virus envelope on contact.

Diagram of electrical adsorption. Virus envelopes are broken open by electrical charge