- In stock (delivery time 1-2 days)
- FREE shipping from 200 EUR value of goods
- 30 days right of return
Matching products
Alb Flextube
Fill up with water flexibly, quickly and cleanly.
The Alb Filter Flextube is the ideal solution for all campers who don't want to bother with dirty hoses when refueling their motorhome. The innovative design of the Flextube allows you to always use the hose in the length you actually need.
Area of application
Hygienically stowed away - ready for use at any time
Thanks to the clever transport bag, the food-safe hose remains clean and protected at all times. Handling is extremely simple: the hose can be pulled out of the bag on both sides to the desired length. A Velcro strap secures it in the middle so that it can be quickly and easily pushed back into the bag after use. Stowed away to save space, it is ready for its next use.
Flexible connection - compatible with Gardena
The high-quality GEKA hose couplings with DVGW approval are fully compatible with standard Gardena hose connectors. This makes the Flextube perfect for city water connections or for Gardena-compatible filling adapters such as the Alb Filter Entry and Alb Entry S.
Optionally with the Alb Entry S filling adapter
Thanks to the clever transport bag, the food-safe hose remains clean and protected at all times. Handling is extremely simple: the hose can be pulled out of the bag on both sides to the desired length. A Velcro strap secures it in the middle so that it can be quickly and easily pushed back into the bag after use. Stowed away to save space, it is ready for its next use.
Fig. shows the 5 meter Alb Filter Flextube
Scope of delivery
1x Flextube (5 m or 10 m)
2x GEKA quick coupling
1x Flextube neoprene cover
Technical data
5 meter hose in bag:
Dimensions: 15cm x 15cm x 40cm
Weight: 800 g
10 meter hose in bag:
20cm x 20cm x 70cm
Weight: 1100 g
Connections: GEKA quick couplings (food-safe and Gardena-compatible)
Installation
- Before starting installation, connect the water supply line to the corresponding fitting.
- Unscrew the cold water supply hose from your angle valve to the fitting.
- Screw a second Flex hose connection onto the angle valve (included in the complete set and complete set with quick-release couplings).
- Then attach the filter housing (ELEMENT or FUSION) between the flex hose connection from the angle valve and the supply line to the fitting.
- Use an adapter if necessary.
- Open the water supply pipe at the angle valve.
- Slowly open the tap and let the water run through the filter for 20 seconds to activate the cartridge for operation. (Fusion: When activating the Active cartridge, the Nano cartridge must not )
-> Please read the supplied installation instructions before installation.
- Open the cord stoppers at both ends of the bag and pull the closures of the Flextube out of the bag on the left and right - make sure that the bag openings are just wide enough to allow the tube to be pulled out in the next step, but that it does not slide out of the bag as a whole.
- Connect one end to the water source (Gardena compatible).
- Pull the other end of the hose up to your water inlet on the motorhome - the hose now slides out of the bag, loop by loop, until it reaches the motorhome. Excess hose remains in the bag.
- If available, connect the GEKA coupling to a filling adapter or city connection. Alternatively, you can also secure the hose by hand during the filling process. When refueling, the hose should ideally be stretched in a slight curve between the water source and the motorhome without touching the ground.
Please note: We recommend always securing the Flextube when refueling, as it tends to contract due to its spiral shape. - After refueling, loosen both ends and let the hose run empty while hanging. If the hose is not used for a longer period of time, we recommend blowing it out to remove all water residue.
- To stow away, push the hose including both hose ends back into the bag from the left and right and close the cord stoppers.
- Before starting installation, connect the water supply line to the corresponding fitting.
- Unscrew the cold water supply hose from your angle valve to the fitting.
- Screw a second Flex hose connection onto the angle valve (included in the complete set and complete set with quick-release couplings).
- Then attach the filter housing (ELEMENT or FUSION) between the flex hose connection from the angle valve and the supply line to the fitting.
- Use an adapter if necessary.
- Open the water supply pipe at the angle valve.
- Slowly open the tap and let the water run through the filter for 20 seconds to activate the cartridge for operation. (Fusion: When activating the Active cartridge, the Nano cartridge must not )
-> Please read the supplied installation instructions before installation.
Made in
Germany
30 days
Right of return
Fast and free
shipping with DHL
Easy payment
also on account