- In stock (delivery time 1-2 days)
- FREE shipping from 200 EUR value of goods
- 30 days right of return
Matching products
Alb Travel Nano
Germ filter for permanent installation in motorhomes and campers
The Travel Nano camping filter is permanently installed in the camper and retains 99.999 % of all harmful germs and bacteria from the incoming water. This means that even microbiologically contaminated water from the tank can be drunk at any time without hesitation.
It is installed in the pressure stage of the water pump and can be placed in different locations depending on where the water is to be filtered. To enable quick and clean installation and removal of the filter, we use specially developed GEKA® quick couplings with integrated backflow stop and stepped nozzles.
Area of application
The stainless steel housing
Made from high-quality V4A stainless steel
The robust and durable stainless steel housing is free of harmful substances, corrosion-resistant, easy to clean, germ-resistant and odorless and tasteless.
One housing, different cartridges
Compatible with all Alb Filter cartridges. The filter can also be used at home as a shower or drinking water filter.
Modular filter housing
The housing can be extended to an additional filter stage (Fusion) and supplemented with the Protect module. The housing can also be installed under the sink or in the shower at home using the appropriate adapters.
10-year guarantee
Our stainless steel enclosures come with a 10-year manufacturer's guarantee.
Produced in southern Germany
Our water filters are manufactured in southern Germany and are subject to Alb Filter's high standards in terms of quality and durability.
Simple filter change thanks to the water stop
To enable quick and clean installation and removal of the filter, we use specially developed GEKA® quick couplings with integrated backflow stop and stepped spout. The GEKA couplings and connectors are 100% Gardena compatible and DVWG certified.
Practical: The quick-release couplings with water stop prevent residual water from leaking out of the pipes at filter change .
Optionally with Protect pre-filter
The fine pores of the installed cartridges can easily become clogged with particles such as sediment, rust and sand. With the replaceable, sintered PP fleece with a fineness of 40 µm, the Protect pre-filter extension offers reliable protection and increases the service life of the subsequent cartridge.
What is filtered?
Microorganisms
The main focus of the Nano cartridge is the filtration of germs and bacteria in high concentrations, e.g. E-Coli, Vibrio Cholarae, Shigella, Salmonella.
Legionella
The Nano cartridge reliably filters legionella from the Tapwater. Whether as a preventative measure or in the event of a positive legionella finding.
Microplastics and other fine particles
Microscopically small plastic particles and other particles are reliably filtered out of the water thanks to the 0.1 µm hollow fiber membrane.
Biofilm-forming microorganisms
Reduces the formation of biofilm and other deposits caused by bacteria.
Stops germs and bacteria
Inside our nano cartridge is a hollow fiber membrane. Similar to bundled straws, this membrane consists of many hollow fibers connected to each other. Due to their small diameter of 0.1 µm, these hollow fiber tubes are able to reliably filter pathogens such as bacteria and germs as well as microplastics and other particles from the water.
Protection against legionella!
The certified quality solution offers maximum protection against Legionnaires' disease. The nano cartridge can be used both preventively and in the event of an actual legionella infestation and protects in accordance with ASTM F838-15A
Scope of delivery
1x Alb filter element housing
1x Alb Filter Nano cartridge
1x GEKA tap connector 1/2" IG
1x GEKA device connector 1/2" AG
2x GEKA quick coupling (Gardena® compatible). Step nozzle 10 - 13 mm (DVGW)
2x hose clamp
1x Protect pre-filter (optional)
Technical data
Housing without connections
Dimensions: 122 mm x 69 mm
Weight: 400 g
Housing material: stainless steel
Connection: ½ inch thread
IMPORTANT: When planning, please note the length of the housing incl. quick-release couplings.
Nano filter cartridge
Dimensions: 95 mm x 47 mm
Weight: 55 g
Material: Plastic (hollow fibers)
Filter technology: Mechanical filtration
Filter type: Germ filter
Replacement interval: 6 months
Filter capacity1: 5000-7000 l
Flow rate2: 11 l/min3
Certified: ASTM F838-15A
Flow diagram
1 Average values - The capacity of the cartridge depends on the quality of the input water.
2 Average values at 3 bar water pressure.
3 Filter performance depends on the flow rate.
Installation
Alb Filter Travel is installed after the water tank and in the pressure stage of the pump. If the filter is installed directly after the pump, as shown in the diagram, all the water (e.g. kitchen tap, hot water, shower, toilet) is filtered accordingly. If you only want to filter the water from one tapping point (e.g. kitchen tap), install the water filter just before this tapping point. Note the length of the filter including the GEKA quick connectors to find a suitable location for installation.
- Before starting installation, connect the water supply line to the corresponding fitting.
- Unscrew the cold water supply hose from your angle valve to the fitting.
- Screw a second Flex hose connection onto the angle valve (included in the complete set and complete set with quick-release couplings).
- Then attach the filter housing (ELEMENT or FUSION) between the flex hose connection from the angle valve and the supply line to the fitting.
- Use an adapter if necessary.
- Open the water supply pipe at the angle valve.
- Slowly open the tap and let the water run through the filter for 20 seconds to activate the cartridge for operation. (Fusion: When activating the Active cartridge, the Nano cartridge must not )
-> Please read the supplied installation instructions before installation.
- Find a suitable place to install the filter (between the pump and tap)
- Cutting through the existing hose system
- Slip the two pipe clamps onto the hose ends.
- Attach the two GEKA® hose connectors (10-13 mm stepped nozzles)
- Positioning and tightening the pipe clamps
- Mounting the wall bracket
- Inserting the filter cartridge(s) in the filter housing
- Inserting the Travel water filter incl. appliance and tap plug into the wall bracket
- Connecting to the hose connectors
You can find more information on the subject of installation on our website under the heading Installation instructions or in the installation instructions supplied.
Further installation help- Before starting installation, connect the water supply line to the corresponding fitting.
- Unscrew the cold water supply hose from your angle valve to the fitting.
- Screw a second Flex hose connection onto the angle valve (included in the complete set and complete set with quick-release couplings).
- Then attach the filter housing (ELEMENT or FUSION) between the flex hose connection from the angle valve and the supply line to the fitting.
- Use an adapter if necessary.
- Open the water supply pipe at the angle valve.
- Slowly open the tap and let the water run through the filter for 20 seconds to activate the cartridge for operation. (Fusion: When activating the Active cartridge, the Nano cartridge must not )
-> Please read the supplied installation instructions before installation.
Made in
Germany
30 days
Right of return
Fast and free
shipping with DHL
Easy payment
also on account